How to Program Beninca TO.GO Remote to RR.2WBV Standalone Receiver

by William Gates 29. August 2013 15:52

Just follow the manual would be ok, however, there is a trick here you may not notice.

After pressed PRG or LEARN button on RR.2WBV receiver, the LED will show up, and DO NOT press the remote control button at this time or it won't program into receiver.

The correct procedure is to wait a moment, as follows.

After pressed PRG or LEARN button on RR.2WBV receiver, the LED will show up, wait a moment, the LED will be off, then will be back on again after a moment, press the remote control button to be programmed then.

In this way, your Beninca TO.GO original or our compatible SR-B2 will be successfully be programmed into the receiver.

Please feel free to contact us if you have any questions or enquiries on our garage and gate compatible remote control - thank you.

Join the conversation

comments powered by Disqus

About Solidremote Blog

Welcome to visit Solidremote Technologies Ltd official technical blog, which is focused on products we make, such as garage door and gate compatible remotes, RF wireless remote control transmitters and relay receivers.

We also provide free radio remote control design tools and calculators, your feedback is very much appreciated.

Calendar

<<  July 2014  >>
MoTuWeThFrSaSu
30123456
78910111213
14151617181920
21222324252627
28293031123
45678910

View posts in large calendar